ATC Surface Cleaner

The ATC Surface Cleaner must only be used on flat even pitches; it is therefore suitable for small synthetic turf applications. The ATC Surface Cleaner has been specially designed to enable the simple and effective maintenance of synthetic turf, both indoors and outdoors. Using the ATC Surface Cleaner will produce a clean and tidy surface free of unwanted particles or other waste, a soft and uniform base and an even playing pitch.

ATC Surface Cleaner for synthetic turf: cleans, aerates and brushes
The ATC Surface Cleaner has a 2-metre coverage and can be pulled by a small sit-on mower, an ATV or a similar machine. The ATC Surface Cleaner is made of low maintenance materials: powder-coated aluminium, stainless steel and polycarbonate. No hydraulic or mechanical couplings are required. The machine has three tools which are specially designed to perform separate tasks:

1. Surface cleaner
This function removes smaller particles and waste from the playing surface. The ATC Surface Cleaner employs a simple principle: a moving device made from polycarbonate presses into the artificial grass and due to the softness and flexibility of the surface, rubber surface dressing granules, particles etc. are lifted/bounce up onto a sieve.

The sieve is fitted with a ‘shaker wheel’ that creates a rapid side-to-side movement of the sieve. The sieve has a mesh size of approximately 6 x 14 mm. The rubber surface dressing granules fall through the sieve and are re-laid onto the playing surface. Other unwanted particles and objects remain in the sieve mesh. The pressure setting of the device is infinitely variable, and can be adjusted to the number of granules used and the type of artificial grass. Paper, gravel, cigarette butts, torn artificial grass fibres, tape, ice cream sticks, chewing gum, etc. are examples of objects that are removed by the ATC Surface Cleaner.

2. Aeration
The ATC Surface Cleaner is equipped with a special tool which is fitted with 60 x 3 mm steel prongs. Their function is to loosen the rubber surface dressing granules in the topmost layer of the surface (10-15 mm). This ensures that the topmost layer of grass and rubber granules remains soft and aerated. This device is also infinitely adjustable and can be lowered and raised according to requirements. It can also be set to a neutral position so that the tool is not in function, if so desired. If the surface has joints or is damaged, use of the tool should be avoided in these areas.

3. Brushing
The ATC Surface Cleaner is fitted with brushes that are specially made for artificial grass. The design and qualities of the brushes ensures that they avoid becoming clogged with loose grass fibres. The brush tool can be infinitely adjusted to the desired depth and height. Brushing ensures an even and level surface.

Technical Specifications
Length 1,640 mm
Width 2,100 mm
Height 290 mm
Weight 76 kg

Disclaimer | Sitemap | Print page